BSi - British Standard Valves
An overview of BSi - British Standard institute valve standards
BSi - British
Standard institute valve standards:
- BS 341-1:1991
Transportable gas container valves. Specification for industrial valves for working pressures
up to and including 300 bar (REPLACED by BS EN 14189:2003) , BS 341-3:2002) , BS EN 849:1997) ,
BS EN ISO 13340:2001) , BS EN ISO 14246:2001) , BS 341-4:2004)
- BS 341-2:1963
Transportable Gas Container Valves. Valves with Taper Stems for Use with Breathing Apparatus.
(REPLACED by BS 341-1:1991) , BS EN 849:1997) , BS EN ISO 12209-1:2001) , BS EN ISO
12209-2:2001) , BS EN ISO 12209-3:2001)
- BS 341-3:2002
Transportable gas container valves. Valve outlet connections
- BS 341-4:2004
Transportable gas container valves. Pressure relief devices
- BS 759-1:1984
Valves, gauges and other safety fittings for application to boilers and to piping installations
for and in connection with boilers. Specification for valves, mountings and fittings
- BS 1123-1:1990
Safety valves, gauges and fusible plugs for compressed air or inert gas installations - Code of
practice for installation
- BS 1212-1:1990
Float operated valves - Specification for piston type float operated valves (copper alloy body)
(excluding floats)
- BS 1212-1:1990
Float operated valves - Specification for piston type float operated valves (copper alloy body)
(excluding floats)
- BS 1212-3:1990
Float operated valves - Specification for diaphragm type float operated valves (plastics
bodied) for cold water services only (excluding floats)
- BS 1212-4:1990
Float operated valves - Specification for compact type float operated valves for WC flushing
cisterns (including floats)
- BS 1552:2004
Specification for open bottomed taper plug valves for 1st, 2nd and 3rd family gases up to 200
mbar
- BS 1570:1960
Flanged and but weld-welding end steel plug valves for the petroleum industry (excluding well
-head and flow-line valves)
- BS1655:1976
Flanged automatic control valves for the process control industry (face to face
dimensions)
- BS 1735:1966
Flanged cast iron outside-screw-and-yoke wedge gate valve, class 125, sizes 1 1/3 in to 24 in,
for the petroleum industry
- BS 1868:1975
Specification for steel check valves (flanged and butt-welding ends) for the petroleum,
petrochemical and allied industries
- BS 1873:1975
Specification for steel globe and globe stop and check valves (flanged and butt-welding ends)
for the petroleum, petrochemical and allied industries
- BS1952:2000
Copper alloy valves for general purposes
- BS1953:2000
Copper alloy check valves for general purposes
- BS1963:1990
Specification for pressure operated relay valves for domestic, commercial and catering gas
appliances
- BS 1968:1953
Specification for floats for ball valves (copper)
- BS2060:2000
Copper alloy screw down stop valves for general purposes
- BS2080:1995
Specification for face to face, center to face, end to end and center to end dimensions of
valves
- BS 2456:1990
Specification for floats (plastics) for float operated valves for cold water services
- BS 2879:1980
Specification for draining taps (screw-down pattern)
- BS2995:1966
Cast and forged steel wedge gate, globe, check and plug valve, screwed and socket welding,
sizes 2 in and smaller, for the petroleum industry
- BS 3457:1973
Specification for materials for water tap and stop valve seat washers
- BS 3464:2000
Cast iron wedge and double disk gate valves for general purposes
- BS3808:1964
Cast and forged steel flanged, screwed and socket welding wedge gate valves (compact design),
sizes 2 in and smaller, for the petroleum industry
- BS3948:1965
Cast iron parallel slide valves for general purposes
- BS3952:1965
Cast iron butterfly valves for general purposes
- BS3961:1965
Cast iron screw down stop valves and stop and check valves for general purposes
- BS 4062-1:1982
Valves for hydraulic fluid power systems - Methods for determining pressure differential/flow
characteristics
- BS 4062-2:1990
Valves for hydraulic fluid power systems - Methods for determining performance
- BS4090:1966
Cast iron check valves for general purposes
- BS4133:1967
Flanged steel parallel slide valves for general purposes
- BS4312:1968
Flanged steel screw down stop valves and check valves for general purposes
- BS 4460:1969
Steel ball valves for the petroleum industry
- BS 5041:1987
Fire hydrant systems equipment - Specification for landing valves for wet risers
- BS 5146 P1:1984
Steel valves for the petrochemical and allied industries
- BS 5150:1990 - Withdrawn, Superseded
Specification for cast iron gate valves
- BS 5151:1982 - Withdrawn, Superseded
Specification for cast iron gate (parallel slide) valves for general purposes
- BS 5152:1989 - Withdrawn, Superseded
Cast iron globe & globe stop and check valves
- BS 5153:1989 - Withdrawn, Superseded
Cast iron check valves for general purposes
- BS 5154:1991
Specification for copper alloy globe, globe stop and check, check and gate valves
- BS 5155:1992
Specification for butterfly valves
- BS 5156:1990
Specification for diaphragm valves
- BS 5157:1989
Specification for steel gate (parallel slide) valves
- BS 5158:1989
Specification for cast iron plug valves
- BS 5159:1982
Cast iron and carbon steel ball valves for general purposes
- BS 5160:1989
Specification for steel globe valves, globe stop and check valves and lift type check
valves
- BS 5163:1991
Specification for predominantly key-operated cast iron gate valves for waterworks purposes
- BS 5351:1990
Steel ball valves for petroleum, petrochemical and allied industries
- BS 5352:1990
Steel wedge gate, globe and check valves 50mm and small
- BS 5353:1989
Specification for steel plug valves
- BS 5417:1976
Testing of general purpose industrial valves
- BS 5418:1984
Specification for marking of general purpose industrial valves
- BS 5672:1991
Specification for designation of the direction of retation and of cylinders and valves in
cylinder heads, and definition of right-hand and left-hand in-line engines and locations on
engines for reciprocating internal combustion engines
- BS 5793-4:1987
Industrial-process control valves - Specification for inspection and routine testing
- BS 5793-6:1986
Industrial-process control valves - Specification for mounting details for attachment of
positioners to control valve actuators
- BS 5834-1:1985
Surface boxes, guards and underground chambers for gas and waterworks purposes - Specification
for guards, including foundation units
- BS 5834-2:1983
Surface boxes, guards and underground chambers for gas and waterworks purposes - Specification
for small surface boxes
- BS 5834-3:1985
Surface boxes, guards and underground chambers for gas and waterworks purposes - Specification
for large surface boxes
- BS 5834-4:1989
Surface boxes, guards and underground chambers for gas and waterworks purposes - Specification
for preformed chambers
- BS 5995:1980
Methods of test for electrohydraulic servovalves
- BS 6282-2:1982
Devices with moving parts for the prevention of contamination of water by backflow -
Specification for check valves of nominal size up to and including DN 54
- BS 6282-3:1982
Devices with moving parts for the prevention of contamination of water by backflow -
Specification for in-line anti-vacuum valves of nominal size up to and including DN 42
- BS 6282-4:1982
Devices with moving parts for the prevention of contamination of water by backflow -
Specification for combined check and anti-vacuum valves of nominal size up to and including DN
42
- BS 6283-2:1991
Safety and control devices for use in hot water systems - Specifications for temperature relief
valves for pressures from 1 bar to 10 bar
- BS 6283-4:1991
Safety and control devices for use in hot water systems - Specification for drop-tight pressure
reducing valves of nominal size up to and including DN 50 for supply pressures up to and
including 12 bar
- BS 6494-4:1989
Hydraulic fluid power valve mounting surfaces - Specification for clamping dimensions of
four-part, size 03 and 05, modular stack valves and directional control valves
- BS 6675:1986
Specification for servicing valves (copper alloy) for water services
- BS 6683:1985
Guide to installation and use of valves
- BS 6697:1986
Methods of test for electrohydraulic proportional control valves
- BS 6755-2:1987
Testing of valves - Specification for fire type-testing requirements
- BS 6759-1:1995
Safety valves - Part 1. Specification for safety valves for steam and hot water
- BS 6759-2:1997
Safety valves - Part 2. Safety valves for compressed air or inert gas
- BS 6759-3:1995
Safety valves - Part 3. Specification for safety valves for process fluids
- BS 6821:1988
Methods for aerodynamic testing of dampers and valves
- BS 7296-1:1990
Cavities for hydraulic fluid power cartridge valves - specification for two-port slip-in
valves
- BS 7350:1990
Specification for double regulating globe valves and flow measurement devices for heating and
chilled water systems
- BS 7389-1:1990
Pneumatic fluid power valve mounting surfaces - specification for five-port directional control
valves (without electrical motor)
- BS 7438:1991
Specification steel and copper alloy waffer check valves, single disk, spring-loaded type
- BS EN 488:2003
District heating pipes - Preinsulated bonded pipe systems for directly buried hot water
networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and
outer casing of polyethylene
- BS EN 558-1:1996
Industrial values face to face and center to face dimensions of metal valves for use in flanged
pipe systems. Part 1 PN designated valves
- BS EN 558-2:1996
Industrial valves face to face and center to face dimensions of metal valves for use in flanged
piping systems. Part 2 class-designated valves
- BS EN 561:2002
Gas welding equipment - Quick-action coupling with shut-off valves for welding, cutting and
allied processes
- BS EN 736-1:1995
Valves - Terminology - Definition of types of valves
- BS EN 736-2:1997
Valves - Terminology - Definition of components of valves
- BS EN 816:1997
Sanitary tapware - Automatic shut-off valves PN 10
- BS EN 917:1997
Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal
pressure and leaktightness
- BS EN 1092-2:1997
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN
designated - Cast iron flanges
- BS EN 1112:1997
Shower outlets for (PN 10) sanitary tapware
- BS EN 1680:1997
Plastics piping systems - Valves for polyethylene (PE) piping systems - Test method for
leaktightness under and after bending applied to the operating mechanism
- BS EN 1704:1997
Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve
after temperature cycling under bending
- BS EN 1705:1997
Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve
after an external blow
- BS EN 12119:1997
Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal
cycling
- BS EN 14141:2003
Valves for natural gas transportation in pipelines - Performance requirements and tests
- BS EN 14189:2003
Transportable gas cylinders. Inspection and maintenance of cylinder valves at time of periodic
inspection of gas cylinders. Partially replaces BS 341-1:1991
- BS EN 28233:1992
Thermoplastics valves - Torque - Test method
- BS EN 28659:1992
Thermoplastics valves - Fatigue strength - Test method
- BS EN 60534-1:1989
Industrial-process control valves - Industrial-process control valves - Control valve
terminology and general considerations
- BS EN 60534-2-1:1999
Industrial-process control valves - Flow capacity - Flow capacity - Sizing equations for fluid
flow under installed conditions
- BS EN 60534-2-3:1998
Industrial-process control valves - Flow capacity - Test procedures
- BS EN 60534-2-5:2003
Industrial-process control valves - Flow capacity - Sizing equations for fluid flow through
multistage control valves with interstage recovery
- BS EN 60534-3-1:2000
Industrial-process control valves - Dimensions - Face-to-face dimensions for flanged, two-way,
globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type,
angle pattern control valves
- BS EN 60534-3-2:2001
Industrial-process control valves - Dimensions - Face-to-face dimensions for rotary control
valves except butterfly valves
- BS EN 60534-3-3:1998
Industrial-process control valves - Dimensions - End-to-end dimensions for buttweld, two-way,
globe-type, straight pattern control valves
- BS EN 60534-5:2004
Industrial-process control valves - Marking
- BS EN 60534-6-1:1998
Industrial-process control valves - Mounting details for attachment of positioners to control
valves - Positioner mounting on linear actuators
- BS EN 60534-6-2:2001
Industrial-process control valves - Mounting details for attachment of positioners to control
valves - Positioner mounting on rotary actuators
- BS EN 60534-8-1:2001
Industrial-process control valves - Noise considerations - Laboratory measurement of noise
generated by aerodynamic flow through control valves
- BS EN 60534-8-2:1991
Industrial-process control valves - Noise considerations - Laboratory measurement of noise
generated by hydrodynamic flow through control valves
- BS EN 60534-8-3:2000
Industrial-process control valves - Noise considerations - Control valve aerodynamic noise
prediction method
- BS EN 60534-8-4:1994
Industrial-process control valves - Noise considerations - Prediction of noise generated by
hydrodynamic flow
- BS EN 60730-2-8:2002
Specification for automatic electrical controls for household and similar use - Particular
requirements - Particular requirements for electrically operated water valves, including
mechanical requirements
- BS EN ISO 5210:1996
Industrial valves - Multi-turn valve actuator attachments
- BS ISO 4401:1996
Hydraulic fluid power - Four-port directional control valves - Mounting surfaces
- BS ISO 6263:1997
Hydraulic fluid power - Compensated flow-control valves - Mounting surfaces
Translate this page to
Spanish
French
German
Italian
Dutch
Norwegian
© The Piping ToolBox
The content in The Piping ToolBox is copyrighted
but can be used with NO WARRANTY or LIABILITY.
Important information should always be double checked with alternative sources.
All applicable national and local regulations and practices concerning this aspects must be strictly followed and adhered to.
We appreciate any comments and tips on how to make The Piping ToolBox
a better information source. Please contact us by email if You find any faults, inaccurate, or
otherwise unacceptable information.
5
12
1