Fiberglass Pipes - common Standards

Commonly used standards for fiberglass pipes and their applications

ASME Standards

Fiberglass related standards from ASME - American Society of Mechanical Engineers:

ASTM Standards

Fiberglass related standards from ASTM International

ASTM C 581 - STANDARD PRACTICE FOR DETERMINING CHEMICAL RESISTANCE OF THERMOSETTING RESINS USED IN GLASS-FIBER-REINFORCED STRUCTURES INTENDED FOR LIQUID SERVICE
ASTM C 582 - STANDARD SPECIFICATION FOR CONTACT-MOLDED REINFORCED THERMOSETTING PLASTIC (RTP) LAMINATES FOR CORROSION RESISTANT EQUIPMENT
ASTM D 149 - STANDARD TEST METHOD FOR DIELECTRIC BREAKDOWN VOLTAGE AND DIELECTRIC STRENGTH OF SOLID ELECTRICAL INSULATING MATERIALS AT COMMERCIAL POWER FREQUENCIES
ASTM D 257 - TEST METHODS FOR DC RESISTANCE OR CONDUCTANCE OF INSULATING MATERIALS
ASTM D 638 - STANDARD TEST METHOD FOR TENSILE PROPERTIES OF PLASTICS
ASTM D 695M - TEST METHOD FOR COMPRESSIVE PROPERTIES OF RIGID PLASTICS (METRIC)
ASTM D 696 - STANDARD TEST METHOD FOR COEFFICIENT OF LINEAR THERMAL EXPANSION OF PLASTICS BETWEEN - 30 DEGREES C AND 30 DEGREES C WITH A VITREOUS SILICA DILATOMETER
ASTM D 790 - STANDARD TEST METHODS FOR FLEXURAL PROPERTIES OF UNREINFORCED AND REINFORCED PLASTICS AND ELECTRICAL INSULATING MATERIALS
ASTM D 792 - TEST METHODS FOR DENSITY AND SPECIFIC GRAVITY (RELATIVE DENSITY) OF PLASTICS BY DISPLACEMENT
ASTM D 1598 - STANDARD TEST METHOD FOR TIME-TO-FAILURE OF PLASTIC PIPE UNDER CONSTANT INTERNAL PRESSURE
ASTM D 1599 - STANDARD TEST METHOD FOR RESISTANCE TO SHORT-TIME HYDRAULIC PRESSURE OF PLASTIC PIPE, TUBING, AND FITTINGS
ASTM D 2105 - STANDARD TEST METHOD FOR LONGITUDINAL TENSILE PROPERTIES OF "FIBERGLASS" (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) PIPE AND TUBE
ASTM D 2143 - STANDARD TEST METHOD FOR CYCLIC PRESSURE STRENGTH OF REINFORCED, THERMOSETTING PLASTIC PIPE
ASTM D 2290 - STANDARD TEST METHOD FOR APPARENT HOOP TENSILE STRENGTH OF PLASTICOR REINFORCED PLASTIC PIPE BY SPLIT DISK METHOD
ASTM D 2310 - STANDARD CLASSIFICATION FOR MACHINE-MADE "FIBERGLASS" (GLASS-FIBER REINFORCED THERMOSETTING-RESIN) PIPE
ASTM D 2412 - STANDARD TEST METHOD FOR DETERMINATION OF EXTERNAL LOADING CHARACTERISTICS OF PLASTIC PIPE BY PARALLEL-PLATE LOADING
ASTM D 2444 - TEST METHOD FOR DETERMINATION OF THE IMPACT RESISTANCE OF THERMOPLASTIC PIPE AND FITTINGS BY MEANS OF A TUP (FALLING WEIGHT)
ASTM D 2583 - STANDARD TEST METHOD FOR INDENTATION HARDNESS OF RIGID PLASTICS BY MEANS OF A BARCOL IMPRESSOR
ASTM D 2584 - STANDARD TEST METHOD FOR IGNITION LOSS OF CURED REINFORCED RESINS
ASTM D 2924 - STANDARD TEST METHOD FOR EXTERNAL PRESSURE RESISTANCE OF "FIBERGLASS" (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) PIPE
ASTM D 2925 - STANDARD TEST METHOD FOR BEAM DEFLECTION OF "FIBERGLASS" (GLASS- FIBER-REINFORCED THERMOSETTING RESIN) PIPE UNDER FULL BORE FLOW
ASTM D 2992 - STANDARD PRACTICE FOR OBTAINING HYDROSTATIC OR PRESSURE DESIGN BASIS FOR "FIBERGLASS" (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) PIPE AND FITTINGS
ASTM D 2996 - STANDARD SPECIFICATION FOR FILAMENT-WOUND "FIBERGLASS" (GLASS- FIBER-REINFORCED THERMOSETTING-RESIN) PIPE
ASTM D 2997 - STANDARD SPECIFICATION FOR CENTRIFUGALLY CAST "FIBERGLASS" (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) PIPE
ASTM D 3262 - STANDARD SPECIFICATION FOR "FIBERGLASS" (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) SEWER PIPE
ASTM D 3517 - STANDARD SPECIFICATION FOR "FIBERGLASS" (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) PRESSURE PIPE
ASTM D 3567 - STANDARD PRACTICE FOR DETERMINING DIMENSIONS "FIBERGLASS" (GLASS- FIBER-REINFORCED THERMOSETTING RESIN) PIPE AND FITTINGS
ASTM D 3615 - CHEMICAL RESISTANCE OF THERMOSET MOLDING COMPOUNDS
ASTM D 3681 - STANDARD TEST METHOD FOR CHEMICAL RESISTANCE OF "FIBERGLASS" (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) PIPE IN A DEFLECTED CONDITION
ASTM D 3754 - STANDARD SPECIFICATION FOR "FIBERGLASS" (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) SEWER AND INDUSTRIAL PRESSURE PIPE
ASTM D 3840 - STANDARD SPECIFICATION FOR "FIBERGLASS" (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) PIPE FITTINGS FOR NONPRESSURE APPLICATIONS
ASTM D 4024 - STANDARD SPECIFICATION FOR MACHINE MADE "FIBERGLASS" (GLASS-FIBER REINFORCED THERMOSETTING RESIN) FLANGES
ASTM D 4161 - STANDARD SPECIFICATION FOR "FIBERGLASS" (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) PIPE JOINTS USING FLEXIBLE ELASTOMERIC SEALS
ASTM D 5365 - STANDARD TEST METHOD FOR LONG-TERM RING-BENDING STRAIN OF "FIBERGLASS" (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) PIPE
ASTM D 5421 - STANDARD SPECIFICATION FOR CONTACT MOLDED "FIBERGLASS" (GLASS-FIBER-REINFORCED THERMOSETTING RESIN) FLANGES
ASTM D 5677 - STANDARD SPECIFICATION FOR FIBERGLASS (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) PIPE AND PIPE FITTINGS, ADHESIVE BONDED JOINT TYPE, FOR AVIATION JET TURBINE FUEL LINES
ASTM D 5685 - STANDARD SPECIFICATION FOR "FIBERGLASS" (GLASS-FIBER-REINFORCED THERMOSETTING-RESIN) PRESSURE PIPE FITTINGS
ASTM D 6041 - STANDARD SPECIFICATION FOR CONTACT-MOLDED "FIBERGLASS" (GLASS-FIBER-REINFORCED THERMOSETTING RESIN) CORROSION RESISTANT PIPE AND FITTINGS
ASTM E 228 - LINEAR THERMAL EXPANSION OF SOLID MATERIALS WITH A VITREOUS SILICA DILATOMETER
ASTM F 1173 - STANDARD SPECIFICATION FOR THERMOSETTING RESIN FIBERGLASS PIPE SYSTEMS TO BE USED FOR MARINE APPLICATIONS

AWWA Standards

Fiberglass related standards from AWWA - American Water Works Association

AWWA C950-01 - Fiberglass Pressure Pipe
AWWA D120-84 (R89) - Thermosetting Fiberglass-Reinforced Plastic Tanks
AWWA F101-02 - Contact-Molded, Fiberglass-Reinforced Plastic Wash Water Troughs and Launders
AWWA F102-02 - Matched-Die-Molded, Fiberglass-Reinforced Plastic Weir Plates, Scum Baffles, and Mounting Brackets

BSi Standards

Fiberglass related standards from BSi - British Standards institute

BS 5480 - Specification for glass reinforced plastics (GRP) pipes, joints and fittings for use for water supply or sewerage
BS 6464 - Specification for reinforced plastics pipes, fittings and joints for process plants
BS 7159 - Code of practice for design and construction of glass-reinforced plastics (GRP) piping systems for individual plants or sites
BS 8010-2.5 - Code of practice for pipelines - Pipelines on land: design, construction and installation - Glass reinforced thermosetting plastics

DIN Standards

Fiberglass related standards from DIN - Deutsches Institut für Normung

DIN 53393 - Testing of Textile Glass-reinforced Plastics; Behavior to the Effect of Chemicals
DIN 53758 - Testing of plastics articles; determination of the effect of internal pressure on hollow objects by short-time test
DIN 53768 - Determination by extrapolation of the long-term behavior of glass fiber reinforced plastics
DIN 53769-1 - Testing of glass fiber reinforced plastics pipes; determination of the longitudinal shear strength of type B pipe fittings
DIN 53769-2 - Testing of glass fiber reinforced plastics pipes; long-term hydrostatic pressure test
DIN 53769-3 - Testing of glass fiber reinforced plastics pipes; determination of initial and long-term ring stiffness
DIN 53769-6 - Testing of glass fiber reinforced plastics pipes; Testing of pipes and fittings under pulsating internal pressure
DIN EN 59 - Glass Reinforced Plastics; Measurement of Hardness by Means of a Barcol Impressor
DIN EN 637 - Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method
DIN EN 705 - Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analyses and their use
DIN EN 761 - Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions
DIN EN 1393 - Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes; Determination of initial longitudinal tensile properties
DIN EN 1447 - Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure
DIN EN 1448 - Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of rigid locked socket- and -spigot joints with elastomeric seals
DIN EN 1449 - Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of a cemented socket- and -spigot joints
DIN EN 1450 - Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of bolted flange joints

ISO Standards

Fiberglass related standards from ISO - International Organization for Standardization

ISO 178 - Plastics - Determination of flexural properties
ISO 527-4 - Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites
ISO 7370 - Glass fiber reinforced thermosetting plastics (GRP) pipes and fittings; Nominal diameters, specified diameters and standard lengths
ISO 7510 - Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents using the gravimetric method
ISO 7684 - Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions
ISO 10466 - Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection
ISO 10928 - Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use
ISO/TR 10465-1 - Underground installation of flexible glass-reinforced thermosetting resin (GRP) pipes; part 1: installation procedures
ISO/TR 10465-2 - Underground installation of flexible glass-reinforced thermosetting resin (GRP) pipes - Part 2: Comparison of static calculation methods
ISO/TR 10465-3 - Underground installation of flexible glass-reinforced thermosetting resin (GRP) pipes - Part 3: Installation parameters and application limits

ToolBox ShortList

Difficult to find your favorite ToolBox page? Add a link to the page in your own personal Shortlist!

• Add this Page! • Delete the ShortList!

Translate this page to Spanish French German Italian Dutch Norwegian

The content in The Piping ToolBox is copyrighted but can be used with NO WARRANTY or LIABILITY. Important information should always be double checked with alternative sources. All applicable national and local regulations and practices concerning this aspects must be strictly followed and adhered to.

We appreciate any comments and tips on how to make The Piping ToolBox a better information source. Please contact us by email if You find any faults, inaccurate, or otherwise unacceptable information.

5 12 1